Roof sheathing cleaning
Plywood and OSB decking with dark staining is cleaned with dry ice blasting, soda blasting, or HEPA sanding, depending on severity and the contractor's equipment.
Attic mold almost never comes from a single leak. Call Breffni Remediation and we'll connect you with an independent attic mold pro in Von Ormy who removes the growth and fixes the airflow problem underneath it.
Most attic growth comes down to three issues: exhaust fans venting into the attic, blocked soffit vents, and air leaks from the house below. Cleaning without fixing them doesn't last.
Real people pick up 24/7.

Here's what separates a real attic fix from a quick spray job.

Each part of the job, from blasting to new baffles, is priced in writing before work begins.
Dry ice and soda blasting lift growth off roof decking without soaking the wood, and HEPA vacuums and air scrubbers handle the dust and spores that come loose.
Our phone line is answered 24/7 and calls go to attic contractors near Von Ormy, which helps when a closing date or a roof replacement is coming up.
Every independent contractor we connect you with is expected to be properly insured and licensed where required.
Here's what independent contractors in our network handle most often in attics.
Plywood and OSB decking with dark staining is cleaned with dry ice blasting, soda blasting, or HEPA sanding, depending on severity and the contractor's equipment.
Fans and dryer vents that end in the attic get rerouted outside, removing a major moisture source.
Insulation pushed against the eaves can block soffit intake. Baffles restore the air channel, and ridge or roof vents are checked so air flows from low to high.
Removing damaged insulation and sealing the gaps where house air escapes keeps the attic colder and drier.
A protective coating can go on once the decking is clean and dry, as an added layer rather than a shortcut.

Four steps, with photos from up top.
Share the inspection notes if you have them so the contractor knows what to look for.
Expect a close look at where the moisture comes from, not just where it ended up.
You get photos and a written plan covering cleaning, ventilation corrections, and insulation or air sealing, each priced clearly.
Decking is cleaned, exhaust routed outside, vents restored, and the job finishes with before-and-after photos you can share with a buyer or insurer.

One free call gets a local attic mold pro to take a look.
Speak to Dispatch: +1-844-326-4757
A few recent attic jobs.

The home inspector flagged black staining on the north side of the roof. The contractor found both bathroom fans venting straight into the attic. They dry ice blasted the decking and ran the ducts out through roof caps.
Every winter we'd get water spots on the bedroom ceiling. Frost was building on the nail tips and melting. They cleared the soffits, installed baffles, and sealed around the can lights. No spots this year.
We were about to replace the roof anyway, so the contractor cleaned the sheathing first and coordinated with the roofer on adding a ridge vent. Good timing saved us a second trip.
The before-and-after photos kept our sale on track. The buyer's agent had questions and the report answered every one of them.
Condensation from household moisture, poor ventilation, and air leaks are the main culprits. Roof leaks can add to it.
It can still damage the roof deck and insulation, and it often becomes an issue when you sell.
Only if the wood is rotted or delaminating. Cleaning handles most attic mold.
A cleaning technique that uses frozen carbon dioxide pellets to remove mold without water or abrasive residue.
They shouldn't. Ducting them outside is a simple fix that often solves the problem at its source.
Typically a day or two for cleaning, plus time for ventilation or insulation work.
Ranch homes, two-stories, and older houses with low-slope roofs across Von Ormy all use the same 24/7 line.
Zip codes covered in Von Ormy include 78073.
Near the edge of town? See the nearby cities listed below.
Check Coverage: +1-844-326-4757